LA300 PLUNGER PUMP is a 300 horsepower 5” stroke horizontal quintuplex single acting plunger pump.Available in two fluid end materials at pump speeds up to 400 RPM and multiple accessory gear reduction unit ratios.
Specifications:
Pump Sizemaximum plunger size x stroke length,in.(mm): 4×5(102 x 127)
Ratedbhp at 400 rpm (kw): 300 (224)
Rated plunger load,pounds(Kg): 10,700(4853.5)
Maximum discharge pressure:psi(kPa)
“L”model:1650 (11,375)
“M”model:3000 (20,682)
“H”model:5000 (34,470)
Crankshaft extension:in.(mm)
Diameter:4.875 (123.8)
Length long side:11 11/16 (297)
Length short side:5 5/8 (143)
Keyway (width x depth):11/4 x 5/8 (32 x 16)
Maximum recommended sheavein.(mm):58 (1473)
Minimum recommended sheave in.(mm):36 (914)
For larger sizes:Contact Factory
Pinion shaft extension,
if gear reducer is supplied,in.(mm)
For belt or chain drive:
Contact Factory
For direct drive:Diameter:3.5 (88.9)
Length:5 11/16 (145)
Keyway (width x depth):7/8 x 7/16 (22.2 x 11.1)
Accessory gear reduction unit:
2.27:1,2.89:1,3.25:1,3.36:1,3.69:1,
4.38:1,4.84:1,5.63:1
Oil Capacity,gallons (L)
Crankcase:12 (45.5)
Gear Reducer-varies with ratio:
3.5 to 6.5 (13.2 to 24.6)
Weight,pump only on
wood shipping skids,pounds (Kg)
“L”:7000 (3175)
“M”:6750 (3062)
“H”:6840 (3103)
Gear reducer,approximate,pounds (Kg): 1100 (499)
Pump Model | Flange | Dimensions | ||||||
Discharge | Suction | A | B | C | D | E | F | |
300Q-5L | 4 (101.6) | 8 (203.2) | 6 | 9 | 43 | 49 | 68 | 25 |
300Q-5M | 3 (76.2) | 6 (152.4) | 4 | 6 | 41 | 48 | 65 | 25 |
300Q-5H | 2 (50.8) | 6 (152.4) | 4 | 6 | 41 | 48 | 65 | 25 |
发表回复